10
2.2 Unpacking
Precautions
Some components on ROCKY-6160 are very sensitive to
static electric charges and can be damaged by a sudden
rush of power. To protect it from unintended damage, be
sure to follow these precautions:
Ground yourself to remove any static charge before
touching your ROCKY-6160 SBC. You can do it by using a
grounded wrist strap at all times or by frequently touching
any conducting materials that is connected to the ground.
Handle your ROCKY-6160 SBC by its edges. Don’t touch IC
chips, leads or circuitry if not necessary.
Do not plug any connector or jumper while the power is on.
Table of Jumpers
LABEL FUNCTION
JP1
GMCH Frequency Strapping
JP2
Compact Flash Master (short)/Slave (open)
Setting.
JP3
CMOS state setting
JP4
LCD Power Select
.
JP5 Pentium
®
4/Mobile P4/Mobile P4-M Select
Note:
All shaded rows in tables of this manual are the default
settings for the ROCKY-6160.
Summary of Contents for ROCKY-6160
Page 11: ...2 1 ROCKY 6160 Layout 9...
