39
Configuration options: [No] [Yes]
PCI Latency Timer [32]
Allows you to select the value in units of PCI clocks for the PCI
device latency timer register.
Configuration options: [32] [64] [96] [128] [160] [192]
[224] [248].
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the
card requests for an IRQ. When set to [No], BIOS does not
assign an IRQ to the PCI VGA card even if requested.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the
PCI devices that an ISA graphics device is installed in the
system so that the latter can function correctly. Setting to
[Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
PCI IDE Bus Master [Disabled]
Allows BIOS to use PCI bus mastering when reading/writing to
IDE devices.
Configuration options: [Disabled] [Enabled]
Off Board PCI/ISA IDE Card [Auto]
Some PCI IDE cards may require this to be set to the PCI slot
number that is holding the card.
IRQ xx [Available]
When set to [Available], the specific IRQ is free for use of
PCI/PnP devices. When set to [Reserved], the IRQ is reserved
for legacy ISA devices.
Configuration options: [Available] [Reserved]
4.9 Boot
The Boot menu items allow you to change the system boot
options. Select an item then press Enter to display the sub-
menu.
Summary of Contents for ROCKY-6160
Page 11: ...2 1 ROCKY 6160 Layout 9...
