manualshive.com logo in svg

IEI Technology ROCKY-4786EV, User Manual

Share
Download
IEI Technology ROCKY-4786EV User Manual Download Page 122

 

 

ROCKY-4786EV/EVG User Manual

Page 112 

BIOS Menu 16: Frequency/Voltage Control

 

The following system parameters are controlled by the Frequency/Voltage Control menu 

(

BIOS Menu 16

). 

 

Auto Detect DIMM/PCI CLk [Enabled] 

The 

Auto Detect DIMM/PCI CLk

 option allows BIOS to monitor power consumption to the 

AGP, PCI and SDRAM DIMM slots and reduce EMI (Electromagnetic Interference) by 

turning them off when unoccupied or inactive. 

 

Enabled 

(D

EFAULT

) 

Bios will monitor and turn off any unoccupied or inactive 

AGP, PCI and SDRAM DIMM slots 

 

Disabled 

 

BIOS will not monitor AGP, PCI and SDRAM DIMM slots

 

Spread Spectrum [Disabled] 

The 

Spread Spectrum

 option is used to reduce EMI (Electromagnetic Interference) 

generated by the system clock. This option is disabled by default so that EMI can be 

controlled by the 

Auto Detect DIMM/PCI CLk

 option. 

 

Enabled 

 

Monitors system clocking to reduce EMI 

(Electromagnetic Interference) 

StockCheck.com

Summary of Contents for ROCKY-4786EV


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands