manualshive.com logo in svg

IEI Technology ROCKY-4786EV, User Manual

Share
Download
IEI Technology ROCKY-4786EV User Manual Download Page 143

 

 

ROCKY-4786EV/EVG User Manual 

Page 133

F.1 Hazardous Materials Disclosure Table for IPB Products 

Certified as RoHS Compliant Under 2002/95/EC Without 
Mercury 

The details provided in this appendix are to ensure that the product is compliant with the 

Peoples Republic of China (China) RoHS standards. The table below acknowledges the 

presences of small quantities of certain materials in the product, and is applicable to China 

RoHS only. 

A label will be placed on each product to indicate the estimated “Environmentally Friendly 

Use Period” (EFUP). This is an estimate of the number of years that these substances 

would “not leak out or undergo abrupt change.” This product may contain replaceable 

sub-assemblies/components which have a shorter EFUP such as batteries and lamps. 

These components will be separately marked.   

Please refer to the table on the next page. 

StockCheck.com

Summary of Contents for ROCKY-4786EV


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands