IEI Technology PUZZLE-IN004 Series, User Manual

Page: 41 / 102

PUZZLE-IN004
Page 31
3.9 Rack Mount
The PUZZLE-IN004 is shipped with two rack mount brackets that could be used to secure
the system to the rack after mounting it with the optional sliding rails. To install the
PUZZLE-IN004 into a rack, please follow the steps below.
WARNING:
The provided rack mount brackets must be used with sliding rails. Using
only the rack mount brackets to mount the system on a rack may cause
damage to the system.
Step 1: Install the rack mount brackets to the sides of the PUZZLE-IN004 by inserting
three retention screws (M4*6) into each bracket ( Figure 3-14 ). Make sure the
screws are tight and on the right positions.
Figure 3-14: Rack Mount Bracket Installation
Step 2: Install the sliding rails according to the instruction came with the sliding rails.
Note: The sliding rails must be purchased separately.
Step 3:
Slide the PUZZLE-IN004 all the way into the rack enclosure.
Step 4: Secure the front of the rack mount brackets that are attached to the sides of the
PUZZLE-IN004 to the front of the rack.