PUZZLE-IN003A
Page 15
To install the DIMM module, please follow the steps below.
Step 1:
Remove the top cover from the PUZZLE-IN003A. Please follow the instruction
described in
Section 3.2
Step 2:
Locate the DIMM slot(s) on the motherboard. C1 SKU has two DIMM slots; C3
SKU has one DIMM slot.
Figure 3-2: DIMM Slot Locations
Step 3:
Open the DIMM socket handles. Open the two handles outwards as far as they
can.
Step 4:
Align the DIMM so the notch on the memory lines up with the notch on the
memory socket.
Step 5:
Once aligned, press down until the DIMM is properly seated. Clip the two
handles into place.
Step 6:
To remove a DIMM, push both handles outward. The memory module is ejected
by a mechanism in the socket.
Step 0:
Summary of Contents for PUZZLE-IN003A
