IEI Technology PUZZLE-IN003A, User Manual

Page: 40 / 89

PUZZLE-IN003A
Page 30
Step 3: Configure the Power_ON ByPass Mode and the Power_OFF ByPass Mode
BIOS options to enable/disable bypass function.
PUZZLE
BIOS Setting
Power_ON ByPass Mode Power_OFF ByPass Mode
Disabled Enabled Disabled Enabled
Bypass Function Disable bypass
when system on
Enable bypass
when system on
Disable bypass
when system off
Enable bypass
when system off
Step 4: Press F4 to save and exit the BIOS menu. The PUZZLE-IN003A will reboot with
the new settings.
3.10.2 Jumper Settings
To configure the jumper settings, please follow the steps below.
Step 1: Remove the top cover. See Section 3.2 .
Step 2: Locate the jumper/switch on the embedded motherboard.
Step 3: Make the jumper settings in accordance with the settings described and defined
in the following sections. Step 0:
3.10.2.1 Clear CMOS
If the PUZZLE-IN003A fails to boot due to improper BIOS settings, the clear CMOS button
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for a few seconds.
The clear CMOS button location is shown in Figure 3-12 below.