IEI Technology PUZZLE-IN002, User Manual

Page: 64 / 96

PUZZLE-IN002
Page 54
4.4.2.1 SATA and RST Configuration
Use the SATA and RST Configuration menu ( BIOS Menu 18 ) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
SATA_SLOT1 (SATA1) Empty
Hot Plug [Disabled]
SATA_SLOT1 (SATA2) 256GB SATA Fla
(256.0GB)
Hot Plug [Disabled]
MINI_PCIE1 (M-SATA) Empty
M_2_BKEY1 Empty
Enable/Disable SATA
Device.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 18: SATA and RST Configuration

SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to configure the SATA controller(s).

Enabled D
EFAULT
Enables the on-board SATA controller(s).

Disabled Disables the on-board SATA controller(s).

SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to determine how the SATA devices operate.

AHCI D
EFAULT
Configures SATA devices as AHCI device.