IEI Technology PPC-F17A-H81, User Manual

Page: 60 / 156

PPC-FxxA-H81 Panel PC
Page 46
Step 1: Install the mounting brackets onto the rear panel ( Figure 3-29 ). The required
number of mounting brackets may vary by models.
Step 2: Slide the rear of the PPC-FxxA-H81 flat panel PC through the rack/cabinet
bracket until the aluminum frame is flush against the front of the bracket
( Figure 3-35 ).
Figure 3-35: The Rack/Cabinet Bracket
Step 3: Insert the mounting clamps into the mounting brackets and pre-formed holes
along the edges of the PPC-FxxA-H81, behind the aluminum frame
( Figure 3-36 ). The required number of mounting clamps may vary by models.
Step 4: Tighten the screws that pass through the mounting clamps until the plastic caps
at the front of all the screws are firmly secured to the bracket ( Figure 3-36 ).