IEI Technology PPC-F17A-H81, User Manual

Page: 51 / 156

PPC-FxxA-H81 Panel PC
Page 37
Step 3: Align the iRIS-2400 module with the iRIS-2400 module slot . Align the notch
on the module with the notch on the iRIS-2400 module slot ( Figure 3-24 ).
Figure 3-24: iRIS-2400 Module Installation
Step 4: Insert the iRIS-2400 module . Push the module in at a 20º angle ( Figure 3-24 ).
Step 5: Seat the iRIS-2400 module . Gently push downwards and the arms clip into
place ( Figure 3-24 ). Step 0:
NOTE:
After installing the iRIS-2400 module, use the LAN port with iRIS label
( Figure 1-4 ) to establish a network connection. Please refer to
Section 3.13 for IPMI setup procedures.
3.10 AT/ATX Mode Selection
AT and ATX power modes can both be used on the PPC-FxxA-H81 panel PC. The
selection is made through an AT/ATX switch on the I/O interface panel. The switch is
shown below.