IEI Technology PPC-F15B-BTi, User Manual

Page: 97 / 153

PPC-F12B/15B/17B/19B-BTi Panel PC
Page 81
5.3.7 IDE Configuration
Use the IDE Configuration menu ( BIOS Menu 11 ) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Advanced
IDE Configuration
Serial-ATA (SATA) [Enabled]
SATA Mode [IDE Mode]
SATA1 Port
Not Present
SATA2 Port
Not Present
Enable or disable Serial
ATA.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
BIOS Menu 11: IDE Configuration

Serial-ATA (SATA) [Enabled]
Use the Serial-ATA (SATA) option to configure the SATA controller(s).

Enabled D
EFAULT
Enables the on-board SATA controller(s).

Disabled Disables the on-board SATA controller(s).

SATA Mode Selection [IDE Mode]
Use the SATA Mode Selection option to determine how SATA devices operate.

IDE Mode D
EFAULT
Configures SATA devices as normal IDE device.

AHCI Mode
Configures SATA devices as AHCI device.