IEI Technology PPC-F12B User Manual Download Page 71

Page: 71 / 151

PPC-F12B/15B/17B/19B-BTi Panel PC

Page 55

3.18 Driver Installation

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

All the drivers for the PPC-F12B/15B/17B/19B-BTi are on the utility CD that came with the

system. The utility CD contains drivers for Windows 7 and Windows 8 operating systems.

Please select the corresponding drivers for the system.

The following drivers can be installed on the

Windows 7

operating system:



Chipset



I/O

driver



Graphics (Intel® EMGD)



TXE



USB

3.0



LAN



Audio



Keypad

The following drivers can be installed on the

Windows 8

operating system:



Chipset



Serial I/O driver (64-bit only)



TXE



Graphics



LAN



Audio



Keypad

Summary of Contents for PPC-F12B
























































































































































Search results

Summary of Contents for PPC-F12B

Reviews:

Brands by name

Popular brands

IEI Technology PPC-F12B, User Manual

Search results

Summary of Contents for PPC-F12B

Reviews:

Brands by name

Popular brands