IEI Technology PPC-F12B-BTi User Manual Download

Page: 52 / 140

PPC-F12B/15B/17B-BTi Panel PC

Page 38

NOTE:

When purchasing the arm please ensure that it is VESA compliant and

that the arm has a 100 mm interface pad. If the mounting arm is not VESA

compliant, it cannot be used to support the PPC-F12B/15B/17B-BTi panel

PC.

Step 2:

Once the mounting arm has been firmly attached to its surface, lift the

PPC-F12B/15B/17B-BTi panel PC onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

PPC-F12B/15B/17B-BTi panel PC. The arm mounting retention screw holes of

the PPC-F12B/15B/17B-BTi panel PC are shown in

Figure 3-26

Figure 3-26: Arm Mounting Retention Screw Holes

Step 4:

Secure the PPC-F12B/15B/17B-BTi to the interface pad by inserting four

retention screws through the mounting arm interface pad and into the

PPC-F12B/15B/17B-BTi panel PC.

Step 0:

Summary of Contents for PPC-F12B-BTi













































































































































Search results

Summary of Contents for PPC-F12B-BTi

Reviews:

Related manuals for PPC-F12B-BTi

Brands by name

Popular brands

IEI Technology PPC-F12B-BTi, User Manual

Search results

Summary of Contents for PPC-F12B-BTi

Reviews:

Related manuals for PPC-F12B-BTi

Brands by name

Popular brands