IEI Technology PPC-F12B-BT, User Manual

Page: 35 / 153

PPC-F12B/15B/17B/19B-BTi Panel PC
Page 19
When installing the panel PC, please follow the precautions listed below:

Power turned off : When installing the panel PC, make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.

Mounting : The PPC-F12B/15B/17B/19B-BTi is a heavy device. When
mounting the system onto a rack, panel, wall or arm, please make sure that at
least two people are assisting with the procedure.

Anti-static Discharge : If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear an anti-static wristband.
3.3 Preinstalled Components
The following components are all preinstalled.

Motherboard

TFT LCD

Touchscreen
Preinstalled OEM customizations may include the following.

CPU

DDR3L memory module

HDD
3.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the panel PC.
Step 2: Install an additional DDR3L SO-DIMM (if necessary).
Step 3: Install HDD, mSATA SSD and iRIS-2400 module.
Step 4: Mount the panel PC.