IEI Technology PPC-F D-ULT5 Series User Manual Download Page 33

Page: 33 / 129

PPC-FxxD-ULT5

Page 19

may only be carried out by qualified personnel who are familiar with the

associated dangers. Never open the equipment. For safety reasons, the

equipment should be opened only by qualified skilled person.



Air Circulation

: Make sure there is sufficient air circulation when installing

the PPC-FxxD-ULT5. The PPC-FxxD-ULT5’s cooling vents must not be

obstructed by any objects. Blocking the vents can cause overheating of the

PPC-FxxD-ULT5. Leave at least 5 cm of clearance around the

PPC-FxxD-ULT5 to prevent overheating.



Grounding

: The PPC-FxxD-ULT5 should be properly grounded. The voltage

feeds must not be overloaded. Adjust the cabling and provide external

overcharge protection per the electrical values indicated on the label attached

to the back of the PPC-FxxD-ULT5.

3.3 Installation Procedure

To properly install the PPC-FxxD-ULT5, the following steps must be followed. Detailed

descriptions of these instructions are listed in the sections that follow.

Step 1:

Unpacking the PPC-FxxD-ULT5 panel PC

Step 2:

Install SATA HDD

Step 3:

Install PoE card (optional)

Step 4:

Install M.2 SSD (optional)

Step 5:

Install wireless LAN module and antenna (optional)

Step 6:

Mount the PPC-FxxD-ULT5

Step 7:

Connect the peripheral devices

Step 8:

Power the system up

Step 0:

Summary of Contents for PPC-F D-ULT5 Series


































































































































Search results

Summary of Contents for PPC-F D-ULT5 Series

Reviews:

IEI Technology PPC-F D-ULT5 Series, User Manual, Page: 33 / 129

Search results

Summary of Contents for PPC-F D-ULT5 Series

Reviews: