IEI Technology PPC-F 15B-BTi-J1/2G/PC-R10 User Manual Download Page 51

Page: 51 / 140

PPC-F12B/15B/17B-BTi Panel PC

Page 37

Figure 3-25: Install into a Rack/Cabinet

Step 6:

Once the flat panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (

Figure 3-25

Step 0:

3.11.4 Arm Mounting

The PPC-F12B/15B/17B-BTi is VESA (Video Electronics Standards Association)

compliant and can be mounted on an arm with a 100 mm interface pad. To mount the

PPC-F12B/15B/17B-BTi on an arm, please follow the steps below.

Step 1:

The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

Summary of Contents for PPC-F 15B-BTi-J1/2G/PC-R10













































































































































Search results

Summary of Contents for PPC-F 15B-BTi-J1/2G/PC-R10

Reviews:

Brands by name

Popular brands

IEI Technology PPC-F 15B-BTi-J1/2G/PC-R10, User Manual

Search results

Summary of Contents for PPC-F 15B-BTi-J1/2G/PC-R10

Reviews:

Brands by name

Popular brands