IEI Technology PPC-3708A-N270 User Manual Download Page 16

Page: 16 / 155

PPC-37xx-N270 Panel PC

Page 2

1.1 Overview

Figure 1-1: PPC-37xx-N270 Panel PC

The PPC-37xx-N270 is an industrial flat panel PC. The PPC-37xx-N270 can be used for

machine control, production lines, kiosks and information stations. The PPC-37xx-N270 is

preinstalled with an Intel® Atom™ CPU for applications where more computing power is

needed.

The PPC-37xx-N270 supports a second monitor for presenting information to customers

or extending the display area. The second monitor can show different information to the

main screen, or duplicate the main screen content.

The PPC-37xx-N270 can be installed in a rack, on a VESA clamp or in a custom enclosure

with a hole of the correct size.

The PPC-37xx-N270 supports one 2.5” hard drive and a CompactFlash® disk for data and

application storage. CompactFlash® is most often used for thin-client applications, where

only basic functions are performed. A hard drive offers more storage space and is the

better choice for a general use computer.

Summary of Contents for PPC-3708A-N270




























































































































































Search results

Summary of Contents for PPC-3708A-N270

Reviews:

Brands by name

Popular brands

IEI Technology PPC-3708A-N270, User Manual

Search results

Summary of Contents for PPC-3708A-N270

Reviews:

Brands by name

Popular brands