IEI Technology PPC-3708, User Manual

Page: 97 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
ECP & EPP
The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the Normal mode
The parallel port is also be compatible with EPP
devices described above
Parallel Port IRQ [IRQ7]
Use the
Parallel Port IRQ
selection to set the parallel port interrupt address.
IRQ5
IRQ5 is assigned as the parallel port interrupt address
IRQ7 D
EFAULT
IRQ7 is assigned as the parallel port interrupt address
Serial Port3 Address [3E8]
Use the
Serial Port3 Address
option to select the base addresses for serial port 3
Disabled
No base address is assigned to serial port 3
3E8 D
EFAULT
Serial port 3 I/O port address is 3E8
2F8
Serial port 3 I/O port address is 2F8
3E8
Serial port 3 I/O port address is 3E8
Page 97