IEI Technology PPC-3708, User Manual

Page: 65 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
screw holes in the CD drive bracket with the retention screw holes on the side of
the CD drive. Insert four retention screws into the bracket on both sides of the
HDD (
Figure 3-18
).
Figure 3-18: CD Drive Bracket Retention Screws
Step 3:
Remove the back cover. See
Section 0
above.
Step 4:
Install the CD drive into the PPC-3712 by aligning the retention screw holes in
the sides of the CD drive bracket with the retention screw holes on the left panel,
the bottom panel and inside the chassis (
Figure 3-19
). Insert the five retention
screws.
Figure 3-19: PPC-3712 CD Drive Retention Screws
Page 65