IEI Technology PPC-3708, User Manual

Page: 64 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
Figure 3-16: PPC-3712 HDD Retention Screws
Step 4:
Connect the IDE/SATA cable from the IDE/SATA connector on the motherboard
to the rear of HDD.
Step 0:
3.8 CD Drive Installation (PPC-3712 Only)
To install the CD drive into the PPC-3712, please follow the steps below:
Step 1:
Attach the CD drive adapter to the CD drive by aligning the two retention screw
holes in the CD drive adapter with the retention screw holes on the rear side of
the CD drive. Place the two spacers between the CD drive and CD drive adapter.
Insert two retention screws into the adapter (
Figure 3-17
).
Figure 3-17: CD Drive Adapter Installation
Step 2:
Attach the CD drive bracket to the CD drive. To do this, align the four retention
Page 64