IEI Technology PPC-3708 User Manual Download Page 131

Page: 131 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

Save Changes and Exit

If configuration changes are complete, select this option to save them and exit the BIOS

menus.

Discard Changes and Exit

If configuration changes are complete but do need to be saved, select this option to exit

the BIOS menus.

Discard Changes

If configuration changes are complete but do need to be saved but BIOS still needs to be

run , select this option.

Load Optimal Defaults

This option loads optimal default values for each of the parameters on the Setup menus.

F9 key can be used for this operation.

Load Failsafe Defaults

This option loads failsafe default values for each of the parameters on the Setup menus.

F8 key can be used for this operation.

Page 131

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands