IEI Technology PPC-3708 User Manual Download Page 126

Page: 126 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

Keyboard & PS/2 Mouse [MONITOR]

The

Power Management/APM

option must be enabled in order to change this

configuration option. The

keyboard & PS/2 mouse

option enables monitoring of activity

on the keyboard and PS/2 mouse ports and rouses the system from a sleep or suspend

state.

Ignore

The system does not monitor the keyboard and PS/2

mouse ports and does not rouse the system from a sleep

or suspend state when an IRQ is detected.

Monitor D

EFAULT

The system monitors the keyboard and PS/2 mouse

ports and rouses the system from a sleep or suspend

state when an IRQ is detected.

FDC/LPT/COM Ports [MONITOR]

The

Power Management/APM

option must be enabled in order to change this

configuration option. The

FDC/LPT/COM Ports

option enables monitoring of activity on

the FDC/LPT/COM ports and rouses the system from a sleep or suspend state.

Ignore

The system does not monitor the FDC/LPT/COM ports

and does not rouse the system from a sleep or suspend

state when an IRQ is detected.

Monitor D

EFAULT

The system monitors the FDC/LPT/COM ports and

rouses the system from a sleep or suspend state when

an IRQ is detected.

Primary master IDE [MONITOR]

The

Power Management/APM

option must be enabled in order to change this

configuration option. The

Primary Master IDE

option enables monitoring of activity of the

primary master IDE device and rouses the system from a sleep or suspend state.

Page 126

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands