IEI Technology POS-6614, User Manual

Page: 96 / 236

POS-6614 Motherboard
CF-520-RS
Figure 4-5: IEI LGA-775 Cooling Kit
The IEI LGA775 CPU cooling kit shown in Figure 4-5 comprises a CPU heat sink and a
cooling fan.
NOTE:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal
paste on the bottom of the CF-520 heat sink. The thermal paste between
the CPU and the heat sink is important for optimum heat dissipation.
To install the cooling kit, follow the instructions below.
Step 1:
Step 2:
Step 3:
Step 4:
Place the cooling kit onto the socket LGA775 CPU . Make sure the CPU
cable can be properly routed when the cooling kit is installed.
Properly align the cooling kit . Make sure the four spring screw fasteners can
pass through the pre-drilled holes on the PCB.
Mount the cooling kit . Gently place the cooling kit on top of the CPU. Make
sure the four threaded screws on the corners of the cooling kit properly pass
through the predrilled holes on the bottom of the PCB.
Secure the cooling kit . From the solder side of the PCB, align the support
bracket to the screw threads on heat sink that were inserted through the PCB
holes. (See Figure 4-6 )
Page 96
IEI® Technology, Corp .