IEI Technology POS-6614, User Manual

Page: 93 / 236

POS-6614 Motherboard
WARNING:
When handling the CPU, only hold it on the sides. DO NOT touch the pins
at the bottom of the CPU.
To install a socket LGA775 CPU onto the POS-6614 motherboard, follow the steps below:
Step 1:
Step 2:
Remove the protective cover. Remove the black protective cover by prying it
off the load plate. To remove the protective cover, locate the “ REMOVE ” sign
and use your fingernail to pry the protective cover off. (See Figure 4-2 )
Figure 4-2: Remove the CPU Socket Protective Shield
Open the socket . Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Rotate the load lever to a fully open
position. Then rotate the load plate towards the opposite direction. (See Figure
4-3 )
Page 93