manualshive.com logo in svg

IEI Technology POS-6614, User Manual

Share
Download
IEI Technology POS-6614 User Manual Download Page 218

 

POS-6614 Motherboard

D.1 Introduction 

The motherboard comes with an onboard Realtek ALC655 CODEC. Realtek ALC655 is a 

20-bit DAC and 18-bit ADC full-duplex AC'97 2.3 compatible stereo audio CODEC with a 

variable sampling rate. 

D.1.1 Accessing the AC’97 CODEC 

The CODEC is accessed through three phone jacks on the rear panel of the motherboard. 

The phone jacks include: 

1.  A LINE output 

2.  A LINE input 

3.  A MIC input line. 

D.1.2 Driver Installation 

The driver installation has been described in 

Section 6.5

. 

e D-1

After rebooting, the sound effect configuration utility appears in the 

Windows Control 

Panel

  (

Figur

). If the peripheral speakers are properly connected, sound effects 

should be heard. 

 

Figure D-1: Control Panel Sound Effect Manager 

 

 

Page 218 

 

IEI® Technology, Corp

.

 

Summary of Contents for POS-6614













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands