IEI Technology POCi-W22C-ULT5 User Manual Download Page 15

Page: 15 / 100

POCi-W22C-ULT5 Medical Panel PC

Page 5

1.4.1 Backlit Touch Buttons

The front panel of the POCi-W22C-ULT5 contains several backlit touch buttons that

control reading light, LCD brightness and some other system components.

Figure 1-3: Backlit Touch Buttons

The following table describes the function of each button.

Button

Function

Power on/off:

Long-press for 2 seconds to power on the system.

Long-press the power button for 10 seconds to force shutdown

the panel PC.

Reading light on/off

–

: Brightness down (minimum brightness: 5%)



: Brightness up (maximum brightness: 100%)

LCD & touch lock on/off:

Long-press to turn on/off the LCD and the touch function. The

touch buttons blink when the LCD is off and the touch function is

locked.

Programmable button or

DICOM mode button (activated only when the optional DICOM

module is installed; press to launch/close the DICOM

Management app)

Note: Press the touch button for at least one second to activate it.

Summary of Contents for POCi-W22C-ULT5





































































































Search results

Summary of Contents for POCi-W22C-ULT5

Reviews:

Related manuals for POCi-W22C-ULT5

Brands by name

Popular brands

IEI Technology POCi-W22C-ULT5, User Manual

Search results

Summary of Contents for POCi-W22C-ULT5

Reviews:

Related manuals for POCi-W22C-ULT5

Brands by name

Popular brands