17
EMC Test Summary
Guidance and manufacturer’s declaration – electromagnetic emissions
The model POC-W24C-ULT3 is intended for use in the electromagnetic
environment specified below. The customer or the user of the model
POC-W24C-ULT3 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment –
guidance
RF emissions
CISPR 11
The model POC-W24C-ULT3 uses RF
energy only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
The model POC-W24C-ULT3 is
suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
Recommended separation distances between portable and mobile RF
communications equipment and the model POC-W24C-ULT3
The model POC-W24C-ULT3 is intended for use in an electromagnetic environment
in which radiated RF disturbances are controlled. The customer or the user of the
model POC-W24C-ULT3 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the model POC-W24C-ULT3as recommended below,
according to the maximum output power of the communications equipment.
Separation distance according to frequency of transmitter
m
Rated maximum
output power of
transmitter
W
150 kHz to 80
MHz
d
= 1,2
P
80 MHz to 800
MHz
d
= 1,2
P
800 MHz to 2,5
GHz
d
= 2,3
P
0,01 0,12
0,12
0,23
0,1 0,38
0,38
0,73
1 1,2
1,2
2,3
10 3,8
3,8
7,3
100 12 12 23
Summary of Contents for POC-W24C-ULT3
Page 4: ...3 Front Panel Bottom Panel ...
Page 5: ...4 Left Panel Rear Panel ...
