IEI Technology POC-17C-ULT3, User Manual, Page: 37 / 163

POC-17C-ULT3 Medical Panel PC
Page 22
Step 6:
Replace the HDD bracket by securing the three retention screws previously
removed. Then, connect the SATA cable from the POC-17C-ULT3 to the rear of
the HDD (
Figure 3-4
).
Figure 3-4: HDD Installation
Step 7:
Replace the HDD cover.
Step 0:
3.5 Handset Installation (Optional)
An optional phone handset can be installed on the side of the POC-17C-ULT3 to make
VoIP calls. To install the handset and the holder, please follow the instruction below.
Step 1:
Locate the two retention screw holes for installing the handset holder on the rear
panel (
Figure 3-5
).