7
Installation Precautions
When installing the medical panel PC, please follow the precautions listed
below:
Manufacturer authorization
: Do not modify this equipment
without authorization of manufacturer.
Certified Engineers
: Only certified engineers should install and
modify the hardware settings.
Power turned off
: When installing the medical panel PC, make
sure the power is off. Failing to turn off the power may cause
severe injury to the body and/or damage to the system.
Anti-static Discharge
: If a user open the rear panel of the medical
panel PC, to configure the jumpers or plug in added peripheral
devices, ground themselves first and wear an anti-static wristband.
Mounting the System – Wall Mount
WARNING:
Use suitable mounting apparatus and be sure to secure the screws of
the mounting apparatus tightly to avoid risk of injury.
To mount the medical panel PC onto the wall, please follow the steps
below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket
on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the
bracket retention screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Summary of Contents for POC-17C-ULT3
Page 4: ...3 Front Panel Bottom Panel ...
Page 5: ...4 Side Panel Rear Panel ...
