IEI Technology PM-945GSE-N270, User Manual

Page: 93 / 122

PM-945GSE-N270 User Manual
Page 93

Disabled The console is not redirected after POST

Boot Loader Redirection is active during POST and during Boot
Loader

Always D
EFAULT
Redirection is always active (Some OSes may not
work if set to Always)

Terminal Type [ANSI]
Use the Terminal Type BIOS option to specify the remote terminal type.

ANSI D
EFAULT
The target terminal type is ANSI

VT100
The target terminal type is VT100

VT-UTF8
The target terminal type is VT-UTF8
5.3.7 USB Configuration
Use the USB Configuration menu ( BIOS Menu 10 ) to read USB configuration
information and configure the USB settings.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
USB Configuration

Module Version – 2.24.3-13.4
USB Devices Enabled:
None
USB Function
[Enabled]
Legacy USB Support [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Enables USB host
controllers

Select Screen
 
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 10: USB Configuration