IEI Technology PICOe-9452 User Manual Download Page 157

Page: 157 / 250

PICOe-9452 Half-size CPU Card

Page 139

6.3.7.1 ACPI Configuration

Use the ACPI Configuration menu (BIOS Menu 11) to select the ACPI state when the

system is suspended.

BIOS Menu 11: ACPI Configuration



Suspend Mode [S1(POS)]

Use the

Suspend Mode

option to specify the sleep state the system enters when it is not

being used.



S1 (POS) D

EFAULT

The system enters S1(POS) sleep state. The system

appears off. The CPU is stopped; RAM is refreshed; the

system is running in a low power mode.



S3 (STR)

The system enters a S3(STR) sleep state. The CPU has

no power; RAM is in slow refresh; the power supply is in a

Summary of Contents for PICOe-9452



























































































































































































































































Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands

IEI Technology PICOe-9452, User Manual

Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands