IEI Technology PICOe-6612 Series Page 115 User Manual Download

Page: 115 / 206

Page 115

PICOe-6612

–5Vin

5.3.6 ACPI Configuration

The

ACPI Configuration

menu (

BIOS Menu 9

) configures the Advanced Configuration

and Power Interface (ACPI) and Power Management (APM) options.

BIOS Menu 9: ACPI Configuration

ACPI Aware O/S [Yes]

Use the

ACPI Aware O/S

option to enable the system to configure ACPI power saving

options. ACPI can only be implemented if the system OS complies with the ACPI

standard. Windows 98, Windows 2000, and Windows XP all comply with ACPI.

Disables the ACPI support for the OS. This selection should

be disabled if the OS does not support ACPI

Summary of Contents for PICOe-6612 Series















































































































































































































Search results

Summary of Contents for PICOe-6612 Series

Reviews:

Related manuals for PICOe-6612 Series

Brands by name

Popular brands

IEI Technology PICOe-6612 Series, User Manual

Search results

Summary of Contents for PICOe-6612 Series

Reviews:

Related manuals for PICOe-6612 Series

Brands by name

Popular brands