IEI Technology PCISA-MARK User Manual Download Page 30

Page: 30 / 224

PCISA-MARK CPU Card

2.11 Drive Interfaces

The PCISA-MARK can support the following drive interfaces.

2 x SATA drives

4 x IDE devices

1 x FDD

1 x Compact Flash (CF) card

2.11.1 SATA Drives

The PCISA-MARK supports two first generation SATA drives with transfer rates of up to

150Mb/s.

2.11.2 IDE HDD Interfaces

The PCISA-MARK system chipset IDE controller supports up to four HDDs with the

following specifications:

Supports PIO IDE transfers up to 16MB/s

Supports the following Ultra ATA devices:

Ultra ATA/133

, with data transfer rates up to 133MB/s

Ultra ATA/100

, with data transfer rates up to 100MB/s

2.11.3 Floppy Disk Drive (FDD)

The PCISA-MARK supports a single FDD. The following FDD formats are compatible with

the board.

5.25”: 360KB and 1.2MB

3.5”: 720KB, 1.44MB and 2.88MB

2.11.4 Compact Flash

Standard CF-II cards can be inserted into the compact flash slot on the solder side of the

PCISA-MARK PCB.

Page 30

IEI® Technology, Corp

Summary of Contents for PCISA-MARK

































































































































































































































Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands

IEI Technology PCISA-MARK, User Manual

Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands