manualshive.com logo in svg

IEI Technology PCISA-LX, User Manual

Share
Download
IEI Technology PCISA-LX User Manual Download Page 201

 

 

Page 201

 

PCISA -LX CPU Card 

 

Figure E-2: RAID BIOS Setup Utility 

Step 7: 

Step 8: 

Configure the RAID settings

. Use the RAID BIOS Setup Utility in 

Figure E-2

 to 

configure the RAID array. Brief descriptions are given below.   

Install the OS

. After the RAID array has been configured (see below) install the 

OS. To do this, refer to the documentation that came with the OS.

Step 0:

 

E.4 RAID Options 

E.4.1 Create RAID 0 Striping for Performance 

 

All data previously stored on the member drives of a RAID 

configuration are destroyed during the RAID initialization 

process. If “used” drives are used to create a RAID array, 

make sure the data has been moved or backed up before 

creating a RAID array out of the disk drives.   

 

 WARNING! 

 

Summary of Contents for PCISA-LX























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands