IEI Technology PCISA-9652 User Manual Download Page 111

Page: 111 / 232

PCISA -9652 Half-Size CPU Card

Page 91

NOTE:

IEI has a wide range of backplanes available. Please contact your

PCISA-9652 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.3 CPU Card Installation

To install the PCISA-9652 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in

Table 5-7

are shipped with the PCISA-9652.

Quantity

Type

1 IDE

cable

Parallel port and RS-232 cable

SATA drive cables

SATA drive power cable

1 USB

cable

Table 5-7: IEI Provided Cables

Optional cables are listed below:

Keyboard/mouse cable

Summary of Contents for PCISA-9652









































































































































































































































Search results

Summary of Contents for PCISA-9652

Reviews:

Related manuals for PCISA-9652

Brands by name

Popular brands

IEI Technology PCISA-9652, User Manual

Search results

Summary of Contents for PCISA-9652

Reviews:

Related manuals for PCISA-9652

Brands by name

Popular brands