IEI Technology PCISA-9652, User Manual

Page: 102 / 232

PCISA-9652 Half-Size CPU Card
Page 82
CAUTION:
The DIMM1 socket must be installed with one DDR2 DIMM to enable
the PCISA-9652 to boot-up properly.
To install a DIMM into a DIMM socket, please follow the steps below and refer to
Figure 5-6 .
Figure 5-6: Installing a DIMM
Step 1: Open the DIMM socket handles . The DIMM socket has two handles that
secure the DIMM into the socket. Before the DIMM can be inserted into the
socket, the handles must be opened. See Figure 5-6 .
Step 2: Align the DIMM with the socket . The DIMM must be oriented in such a way
that the notch in the middle of the DIMM must be aligned with the plastic bridge
in the socket. See Figure 5-6 .
Step 3: Insert the DIMM . Once properly aligned, the DIMM can be inserted into the
socket. As the DIMM is inserted, the white handles on the side of the socket will