manualshive.com logo in svg

IEI Technology PCIE-Q350, User Manual

Share
Download
IEI Technology PCIE-Q350 User Manual Download Page 116

 

 

PCIE-Q350 PICMG 1.3 CPU Card 

Page 95

 NOTE: 

IEI has a wide range of backplanes available. Please contact your 

PCIE-Q350 vendor, reseller or an IEI sales representative at 

[email protected] or visit the IEI website (http://www.ieiworld.com.tw) 

to find out more about the available chassis. 

5.6.3 CPU Card Installation 

To install the PCIE-Q350 CPU card onto the backplane, carefully align the CPU card 

interface connectors with the corresponding socket on the backplane. See 

Figure 5-10

. 

 

Figure 5-10: PCIE-Q350 Backplane Installation 

Next, secure the CPU card to the chassis. To do this, please refer to the reference 

material that came with the chassis. 

5.7 Internal Peripheral Device Connections 

5.7.1 Peripheral Device Cables 

The cables listed in 

Table 5-3

 are shipped with the PCIE-Q350. 

Summary of Contents for PCIE-Q350



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands