IEI Technology PCIE-H810, User Manual

Page: 75 / 142

PCIE-H810 PICMG 1.3 CPU Card
Page 61
4.8.4 mSATA Mode Selection
The jumper configures the PCIe Mini slot (CN4) to automatically detect mSATA device or
to force mSATA to be enabled.
Setting Description
Open Auto-detect mSATA device (default)
Short 1-2 Enable mSATA
Table 4-3: mSATA Mode Selection Jumper Settings
Figure 4-17: mSATA Mode Selection Jumper Location
4.8.5 USB Power Selection
The USB power selection is made through the BIOS menu in “Chipset

PCH-IO Configuration”.
Use the USB SW1 Power and the USB SW2 Power BIOS options to configure the
correspondent USB ports (see Table 4-4 ) and refer to Table 4-5 to select the USB power source.
BIOS Options Configured USB Ports
USB SW1 Power
USB_C1 (external USB 2.0 port)
USB_C2 (external USB 2.0 port)
USB SW2 Power
USB2 (internal USB 2.0 ports)
USB3 (internal USB 2.0 ports)
USB4 (internal USB 2.0 port, Type A)
CN5 (internal USB 3.1 Gen 1 ports)
Table 4-4: BIOS Options and Configured USB Ports
Options Description
+5V DUAL +5V dual (default)
+5V +5V
Table 4-5: USB Power Source Setup
Please refer to Section 5.4.1 for detailed information.