IEI Technology PCIE-H810 User Manual Download

Page: 76 / 142

PCIE-H810 PICMG 1.3 CPU Card

Page 62

4.9 Chassis Installation

4.9.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the PCIE-H810 must have air vents

to allow cool air to move into the system and hot air to move out.

The PCIE-H810 must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel through the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow through the board

surface.

4.9.2 CPU Card Installation

To install the CPU card onto the backplane, carefully align the CPU card edge connector

with the CPU card socket on the backplane. To do this, please refer to the reference

material that came with the backplane. Next, secure the CPU card to the chassis. To do

this, please refer to the reference material that came with the chassis.

Summary of Contents for PCIE-H810















































































































































Search results

Summary of Contents for PCIE-H810

Reviews:

Related manuals for PCIE-H810

Brands by name

Popular brands

IEI Technology PCIE-H810, User Manual

Search results

Summary of Contents for PCIE-H810

Reviews:

Related manuals for PCIE-H810

Brands by name

Popular brands