IEI Technology PCIE-H610, User Manual, Page: 104 / 140

PCIE-H610 PICMG 1.3 CPU Card
Page 91
ƒ
128 MB
ƒ
256 MB
ƒ
Maximum D
EFAULT
Î
IGD - Boot Type [AUTO]
Use the IGD - Boot Type option to select the display device used by the system when it
boots. For dual display support, select “Auto.” Configuration options are listed below.
ƒ
AUTO D
EFAULT
ƒ
CRT
ƒ
DVI
5.5 Boot
Use the Boot menu ( BIOS Menu 22 ) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Launch PXE OpROM [Disabled]
Option ROM Messages [Keep Current]
Boot Option Priorities
Select the keyboard
NumLock state
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 22: Boot
Î
Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.