IEI Technology PCIE-9450 User Manual Download Page 93

Page: 93 / 232

PCIE-9450 PICMG 1.3 CPU Card

Page 73

5.5.2 Backplane Installation

Before the PCIE-9450 can be installed into a chassis, a backplane must first be installed.

Please refer to the installation instructions that came with the backplane and the chassis.

NOTE:

IEI has a wide range of backplanes available. Please contact your

PCIE-9450 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available backplanes.

5.5.3 CPU Card Installation

To install the PCIE-9450 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

5.6 Internal Peripheral Device Connections

5.6.1 Peripheral Device Cables

The cables listed in

Table

5-3

are shipped with the PCIE-9450.

Quantity

Type

ATA 66/100 flat cable

KB/MS PS/2 Y cable

RS-232 cable

SATA drive cable

SATA drive power cable

USB cable

Table 5-3: IEI Provided Cables

Summary of Contents for PCIE-9450









































































































































































































































Search results

Summary of Contents for PCIE-9450

Reviews:

IEI Technology PCIE-9450, User Manual, Page: 93 / 232

Search results

Summary of Contents for PCIE-9450

Reviews: