IEI Technology PCIE-9152, User Manual

Page: 64 / 194

PCIE-9152 PCIMG 1.3 CPU Card
Page 48
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
15 SB3 V 16 SERIRQ
17 GND1 18 GLKRUN#
19 LPCPD# 20 LDRQ#
Table 4-18: TPM Connector Pinouts
4.3 External Peripheral Interface Connector Panel
Figure 4-18 shows the PCIE-9152 rear panel. The PCIE-9152 rear panel consists of two
RJ-45 Ethernet connectors, a PS/2 keyboard connector a USB port and a VGA connector.
These connectors are accessible when the PCIE-9152 is installed in a chassis.
Figure 4-18: PCIE-9152 External Peripheral Interface Connector
4.3.1 LAN Connectors
CN Label: LAN1 and LAN2
CN Type: RJ-45
CN Location: See Figure 4-18
CN Pinouts: See Table 4-19
The PCIE-9152 is equipped with two built-in GbE Ethernet controllers. The controllers can
connect to the LAN through two RJ-45 LAN connectors. There are two LEDs on the
connector indicating the status of LAN. The pin assignments are listed in the following
table:
PIN DESCRIPTION PIN DESCRIPTION
1 TXA+ 5 TXC-
2 TXA- 9 TXB-
3 TXB+ 10 TXD+