IEI Technology PCIE-9152 Page 131 User Manual Download

Page: 131 / 194

PCIE-9152 PCIMG 1.3 CPU Card

Page 115

Enabled

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

Use the

AddOn ROM Display Mode

option to allow add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

The system forces third party BIOS to display

during system boot.

Keep Current

The system displays normal information during

system boot.

Bootup Num-Lock [On]

Use the

Bootup Num-Lock

BIOS option to specify if the number lock setting must be

modified during boot up.

Off

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

On D

EFAULT

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Lock LED light on the keyboard is lit.

LAN Boot [Enabled]

Use the

LAN Boot

option to enable the system to be booted from the LAN.

Disabled

System cannot be booted from the LAN

Enabled D

EFAULT

System can be booted from the LAN

Summary of Contents for PCIE-9152



































































































































































































Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands

IEI Technology PCIE-9152, User Manual

Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands