IEI Technology PAC-400AI-C236, User Manual

Page: 95 / 110

PAC-400AI-C236 Embedded System
Page 85
B.1 Safety Precautions
WARNING:
The precautions outlined in this appendix should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the PAC-400AI-C236.
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.

Make sure the power is turned off and the power cord is disconnected
when moving, installing or modifying the system.

Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock.

Electric shocks can occur if opened while still powered on.

Do not drop or insert any objects into the ventilation openings.

If considerable amounts of dust, water, or fluids enter the system , turn
off the power supply immediately, unplug the power cord, and contact the
system vendor.

DO NOT
:
o
Drop the system against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature