IEI Technology PAC-400AI-C236 User Manual Download Page 54

Page: 54 / 110

PAC-400AI-C236 Embedded System

Page 44

5.3.2 PCH-FW Configuration

The

PCH-FW Configuration

menu (

BIOS Menu 4

) allows the Intel® AMT options to be

configured.

Advanced

AMT BIOS Features

[Enabled]

Un-Configure ME

[Disabled]

When disabled AMT BIOS

Features are no longer

supported and user is no

longer able to access MEBx

Setup.

Note:

This option does not

disable Manageability

Features in FW

---------------------



: Select Screen

↑

↓

: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

BIOS Menu 4: PCH-FW Configuration



AMT BIOS Features [Enabled]

Use

AMT BIOS Features

option to enable or disable the Intel® AMT function.



Disabled

Intel® AMT is disabled



Enabled

EFAULT

Intel® AMT is enabled



Un-Configure ME [Disabled]

Use the

Un-Configure ME

option to perform ME unconfigure without password operation.



Disabled

EFAULT

Not perform ME unconfigure



Enabled

To perform ME unconfigure

Summary of Contents for PAC-400AI-C236















































































































Search results

Summary of Contents for PAC-400AI-C236

Reviews:

Related manuals for PAC-400AI-C236

Brands by name

Popular brands

IEI Technology PAC-400AI-C236, User Manual

Search results

Summary of Contents for PAC-400AI-C236

Reviews:

Related manuals for PAC-400AI-C236

Brands by name

Popular brands