IEI Technology PAC-400AI-C236, User Manual

Page: 27 / 110

PAC-400AI-C236 Embedded System
Page 17
Step 4:
Mount a 3.5" HDD onto the 3.5" drive bracket. To secure the HDD to the HDD
bracket, insert four retention screws from the bottom surface of the HDD
bracket.
Figure 3-4: 3.5" HDD Retention Screws
Step 5: Reinstall the drive bracket and reinsert the four previously removed retention
screws.
Step 6: Connect the HDD power connector and SATA connector.
3.4 PCIe Mini Card Installation (mSATA)
The PAC-400AI-C236 has one full-size/half-size PCIe Mini slot on the motherboard. To
install a full-size module, follow the instructions below.
Step 1:
Remove the internal access panel from the PAC-400AI-C236. See
Section 3.2
.
Step 2: Locate the PCIe Mini slot on the motherboard (Figure 3-5).