CALL FORWARDING FUNCTION
(Does NOT require Call Forwarding Service with your telephone company)
If you are going to be away from home, you can have the OTIU call you when there is a visitor.
When a visitor presses the CALL button, the OTIU will ring the home telephone 1 time. If the
telephone is not answered, the OTIU will dial the call-forwarding number that you have programmed
into it (see below). After ringing the forwarding number 3 times, the OTIU will hang up. If a visitor
presses the CALL button again, the process will repeat.
When you answer a call from the OTIU, you will hear a repeating beep for up to 10 seconds. If you
want to accept the call from the OTIU simply dial:
0
Hang up to disconnect.
To control the gate, dial:
*9
NOTE:
The OTIU checks to see if the home line is busy prior to dialing the forwarding number. If it is
busy, the OTIU will wait and try a second time. Once the OTIU dials out to the forwarding number, if
the forwarding number is busy, the OTIU will wait and try a second time as well.
TO PROGRAM A FORWARDING PHONE NUMBER
To program in forwarding telephone number, use the telephone that is directly connected to the
OTIU, and dial:
*# “beep”
Enter the telephone number (up to 14 digits) that you wish to forward calls to. To accept the new
number simply press:
# “beep”
NOTE: For long distance calls, be sure to include the proper prefix.
VERIFYING THE CALL FORWARDING PHONE NUMBER
Using the telephone connected to the OTIU, dial:
**06 “beep”
Hang up the telephone
The telephone will ring and the forwarded number that you have programmed into the OTIU will be
displayed on the Caller ID screen.
TO ENABLE/DISABLE CALL FORWARDING
To enable the Call Forwarding function, use the telephone that is directly connected to the OTIU and
dial:
**
01 “beep”
To disable the Call Forwarding function, use the telephone that is directly connected to the OTIU and
dial:
**02 “beep”
Summary of Contents for oracle
Page 9: ......
