IEI Technology NOVA-GM45A, User Manual, Page: 77 / 153

NOVA-GM45A Motherboard
Page 65
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set. The
jumper sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in Table 4-7 .
Pin Description
1-2 +3.3V
2-3 +5V
Table 4-7: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 4-10 .
Figure 4-10: LVDS Voltage Selection Jumper Pinout Locations
4.7.7 PC/104-Plus Voltage Setup
Jumper Label: JP5
Jumper Type: 3-pin header
Jumper Settings:
See Table 4-8
Jumper Location:
See Figure 4-11
This jumper selects the voltage supplied to the PC/104 expansion module.
Setting Description
Short 1-2 +5 V
Short 2-3 +3.3 V
Table 4-8: PC/104-Plus Voltage Setup Jumper Settings