7
2.2
Clear CMOS Setup
CMOS RAM holds the board’s configuration data, which has to be set by means of
system BIOS. To clear CMOS RAM, close JP1 for about 3 seconds, and then open
it again. It will then resume normal operation.
•
JP1: Clear CMOS Setup
JP1 Description
1-2
Keep CMOS Setup
(Normal Operation)
2-3
Clear CMOS Setup
2.3
Compact Flash Setting
Set the operating mode of Compact Flash disk. This is similar to the operation of
hard disk.
•
JP2: Compact Flash Setting
JP2 Description
OPEN
Slave
Close Master
2.4
Audio Amplifier Select
This jumper is for the setting of Audio Amplifier.
•
JP5: Audio L_Line out select
JP5 Description
1-2 OFF
2-3
ON
•
JP6: Audio R_Line out select
JP6 Description
1-2 OFF
2-3
ON
