12
2.2 Clear CMOS Setup
The CMOS RAM holds the board’s configuration data, which had
to be set through system BIOS. In case you want to clear the
CMOS RAM (for example, if you have forgotten the password,
you should clear the CMOS setting then re-set the password.),
you need to close JP1 for about 3 seconds, then open it again
to set system back to normal operation mode.
•
JP1: Clear CMOS Setup
JP1 DESCRIPTION
1-2
Keep CMOS Setup
(Normal
Operation)
2-3
Clear CMOS Setup
2.3 Compact Flash Setting
Set the operating mode of CompactFlash disk. This is similar to
the operation of a hard disk.
•
JP2 : Compact Flash Setting
JP2 DESCRIPTION
OPEN
Slave
Close Master
2.4 Audio Amplifier Select
This jumper is for the setting of Audio Amplifier.
•
JP5 : Audio L_Line out select
JP5 DESCRIPTION
1-2 OFF
2-3
ON
•
JP6 : Audio R_Line out select
JP6 DESCRIPTION
1-2 OFF
2-3
ON
